Plastic Laminate
Plastic Laminate
Toilet partitions manufactured in our Plastic Laminate line utilizes High Pressure Laminates that meet or exceed NEMA standards. Standard Core is particleboard and not recommended for high moisture areas. For high moisture areas, Solid Phenolic Core or High Density Polymer should be used.
Series: 30, 40, 50, 60, Eastern, Eastern Max
Solid Phenolic Core
Solid Phenolic Core Toilet Partitions
Solid Phenolic toilet partitions are composed of melamine impregnated decorative surface papers superimposed over a varying number of Kraft phenolic core sheets to achieve a desired thickness, forming a one piece panel.
Series: 30, 40, 50, 60, Eastern, Eastern Max
Stainless Steel
Stainless Steel Toilet Partitions
Generals’ exclusive use of Stainless Steel polished to a satin finish offers the ultimate in toilet partitions. The finish is protected in the manufacturing process and in shipping by a PVC film which is removed at the time of installation. Scratches can be removed, and the original beauty restored by buffing. It is also available with a deep textured surface, or powder coated.
Series: 30, 40, 50, 60, Eastern, Eastern Max
Fiberglass Reinforced
Fiberglass Reinforced Toilet Partitions
Generals’ FRP is a highly durable toilet partitions system with a resin rich surface that is durable and easy to clean. The FRP is bonded to a solid 90% wood substrate core. Virtually 100% of our wood supply comes from managed forestlands.
Series: 30, 40, 50, 60, Eastern, Eastern Max
High Density Polymer
High Density Polymer Toilet Partitions
Generals’ HDPE toilet partitions, showers, and dressing compartments are manufactured using high density polymer resin. Color is solid throughout. Compartments will not rust, rot, or delaminate.
Series: 30, 40, 50, 60, Eastern, Eastern Max
Color-Thru Solid Phenolic Core
Color-Thru Solid Phenolic Core Toilet Partitions
Color-Thru Solid Phenolic Core Panels offer all the strength and durability of our black core phenolic, but with the added advantage of consistent matching color throughout the core.
Series: 30, 40, 50, 60, Eastern, Eastern Max
Powder Coated Steel Partitions
Generals’ Powder Coated Galvanized-Bonderized Steel is available in all styles for toilet partitions, showers, and dressing compartments. The exclusive use of galvanized-bonderized steel provides additional protection while enhancing paint adhesion. The finish is a superior quality powder coated Hybrid Epoxy – polyester applied electrostatically, and baked until fully cured.
General’s metal panel skins are bonded under pressure to each cell of the sound deadening Ribcore with an adhesive that is impervious to moisture. General utilizes a tight ¾” cell size to ensure greater bond and rigidity to the toilet partitions.
All General Partitions’ exposed corners are reinforced with mechanically fused corner reinforcements. The reinforced corner doubles the strength of the corner while allowing simple field repairs if and when required. The corners also eliminate welding and grinding of the corners which removes some of the protective zinc coating as well as part of the metal edge
This color selector shows an approximate representation of the colors, monitors vary, and actual color samples should be requested for absolute color fidelity. Images are meant for design purposes only and do not necessarily represent the hardware supplied for each particular material. View standard hardware for your material. Please contact us to request an actual color swatch for absolute color fidelity.
Learn More